Petrol/LPG and Diesel Engines

Procedure of treating an engine with lubricant capacity of 2 to 10 litres (3 tubes).IMPORTANT! The full treatment means three stage process. You need a set of 3 blisters

Stage 1

Squeeze out the contents of one tube into the lubricant neck of the engine warmed up to the running temperature.
Start the engine and let it idle for no less than 2 minutes.

Stage 2

Do as described in Phase 1 after a running of 60 to 150 miles (100-250 km).

Stage 3

Do as described in Phase 2 after a running of 60 to 150 miles (100-250 km).
Revitalization is considered complete at a mileage of no less than 930 miles (1,500 km).

Note!

DO NOT CHANGE the oil until treatment has been completed!
It is possible to treat at idle: 4 hours are equivalent to a running of 120 miles (200 km).
Treat new engines with one dose: two tubes simultaneously.